Lagos:classical oil and gas training in (sept,2011)morning,evening $ weekend sessionAspen HYSYS, PDMS, AUTOCAD
Due to the on goining trend of things in nigeria industries where almost all aspect of Nigerian industries is been headed and managed by expatriates due to low technical know how of Nigerian graduates, a local content policy had been designed by the federal government to
empower Nigerians in the management of their affairs in the absence of expatriates. To achieve this, strategic plans had been mapped out to train and retrain Nigeriana to this effect.
On this note, it had been of PARAMOUT INTEREST to train Nigerian graduates and students in the use of sophisticated software like PDMS and HYSYS, SOLID WORKS for engineering designs.
Aspen HYSYS is the most popular and industry driven software used for
process design, especially designs related to the oil and gas industry. Flarenet handles gas flaring, pipenet deals with
hydraulic pipe modeling, PDMS handles graphical and catalogue based plant design from conception to decommissioning, while SOLID WORKS deal with engineering component design, simulation and stress analysis
HYSYS handles process modeling from the oil/gas well, to the NGL plant or to the
refinery and distribution..Presently it is being used by SHELL, CHEVRON, NNPC,
EXXON-MOBIL AND many oil servicing companies.
In Port Harcourt a training centre is now open to offer training in the use of these softwares to let interested individuals or group to equip themselves for the oil and gas career.
The instructors are experienced and technically based engineers. This training contains latest PTDF training format and materials. Training is open to graduates and students of; chemical, mechanical, petroleum, civil, gas, materials and metallurgical, environmental engineering as
well as geology industrial physics and chemistry and those interested in the oil and gas industry.
Also plans had been put in place to allow interested individuals in Lagos state to be part of this local content policy. that is, to be part of this training on the use of this sophisticated Oil & Gas tools(software). So there will be training on this software(s) come month of may in Lagos.
Our major goal is to transfer technology.
Below are details of our training courses:
MODELING OIL & GAS PROCESSING FACILITIESUSING ASPEN HYSYS
• Introduction to HYSYS
• Propane Refrigeration loop
• Refrigerated Gas Plant
• NGL Fractionation Train
• Oil Characterization
• Gas Gathering
• Two-Stage Compression
• Acid Gas Sweetening with DEA
• Natural Gas Dehydration with TEG
• Reporting in Aspen HYSYS
At the end of these topics a gas gathering and a flow station revamp project will be handled by the trainees After completion of this training, trainees will be able to participate in the
following actively and effectively.
• IPP PROJECTS (INVOLVING THE USE OF GAS
TURBINES)
• LNG PROCESSES
• CRUDE REFINING
• GAS TRANSPORTATION
• LPG PROCESSES
FLOW STATION REVAMP PROJECTS
AND OTHER OIL AND GAS PROCESSES.
PDMS
The following will be handled in the PDMS
(PLANT DESIGN MANAGEMENT SYSTEM) training.
MODULES/Design, Isodraft, Draft,
APPLICATIONS:1.In the Design module which is the graphical constructor we will cover the
following discipline specific simulation applications.
A. Equipment (vessels, pumps, heat exchanger, assemblies, air coolers)
B. Piping and Instrumentation INCLUDING explicit piping for piping engineers
C. Structural steelwork (column, beams, panels and plates, wall and floors) for civil
and structural engineers
D. ASL MODELLER (Access, stairs and ladder)for structural and civil engineers
E. Cable trays for electrical and electronics & instrument engineers
2. Production of MTO ’s and piping general assembly
3. Conversion from PDMS Draft to AutoCAD format.
4. Customizing PDMS
5. Plant layout
6. Using ASME code
The training will be based on ASME B31.3 & B31.4 CODE.
At the end of the training, a project on modeling of a process plant will be carried out by the trainee. The project will be discipline specific
FULL PACKAGE AUTOCAD TRAINING AUTOCAD 2D DRAFTING ,DOCUMENT
CONTROL,MANAGEMENTAND ISSUANCE
OF DELIVERABLESa. AutoCAD general
b. AutoCAD mechanical
c. AutoCAD PID piping and instrumentation design.
d. AutoCAD structural /architectural/geological
e. DOCUMENT COTROL ,MANAGEMENT AND
ISSUANCE OF DELIVERABLES
a. AutoCAD general.
1. Introduction to AutoCAD, and 2D drafting,
2. RASTERS AND VECTOR MANIPULATION
b. AUTOCAD MECHANICAL.
1. ENGINE BLOCK MODELING
2.GEARS BOLTS AND NUTS
4.INDUSTRIAL MODELING
c. AUTOCAD PID
1.SURF. (SUBSEA UMBLICALS, RISERS,AND
FLOATERS,
2.ELBOWS AND TEES
3.PUMPS AND COMPRESSORS.
4.WELL HEAD AND PLATFORM MODELLING.
5.AUTOCAD PIPING ISOMETRICS AND DRAFTS
D.AUTOCAD CIVIL/STRUCTURAL/Geological
1. House plan and elevation
2.geological mapping,
AUTOCAD 3D MODELLING ,RENDERING AND
DWF USAGE1. Introduction to 3D fundamentals
2. Modeling of structures (houses, bridges, masts e.t.c)
3. Modeling of mechanical parts and components (locomotives, engine parts, pumps, vessels,
heat exchangers, e.tc)
4. Modeling of piping components (elbows, tees, flange, reducer, valves, e.t.c
5. Modeling of Oil facilities
6. Project and Assessment
7. Rendering
8. Using drawing web format
VENUE:
ST PAUL EXECUTIVE SERVICES LTD,
No 42/44 Awolowo way Ikeja Under Bridge, Opposite Oceanic Bank Ikeja Lagos State.
DATE: MORNING SESSION:
15th-29th SEPTEMBER 2011
TIME: PDMS & AUTOCAD- 9am-3pm
EVENING SESSION
15th September-4th Oct 2011
TIME: 4pm-7pm
WEEKENED SESSION
Days: Sept 16,17,18,23,24,25,30 Oct. 1 & 2
Powered by WTSCONSULT
For enquires visit: ww.willocktech.com
Or call:
UCHE -08039248484, 08098681242
Or mail us at:
http://www.blogger.com/goog_401904930
wtsconsultinfo@rocketmail.com
To book ur Seat: Text ur full name, phone number and E-mail Address to our contacts above
ABOUT US:
Golden Pasta Company Limited
A full subsidiary of Flour Mills of Nigeria Plc with the right motivation to a uniqueon World Class Manufacturing. Due to the expansion, we hereby recruit under listed vacancy in our Agbara factory for immediate employment.
STORE KEEPERS
MAIN PURPOSE OF POSITION: To assist in controlling the issuance of spare parts and consumables, to ensure production and cost efficiency as well as maintains records off consumption.
THE PERSON: Organised, analytical skills, hardworking and a knack for details.
QUALIFICATION/EXPERIENCE: ND in Purchasing and Supply, Accounting or Engineering, 1 year experience in a similar position in a manufacturing environment
REMUNERATION: Competitive and above industry minimum.
Qualified and interested candidates should send their resume in MS Word as attachment with the position applied for on the subject line to: info@goldenpastang.com not later than two weeks from this week.
